Add a beautifully elongated, low-profile stone feature to your vertical landscapes with the Wall Planter WP-003. Professionally modeled after rugged weathered stone outcrops, this linear rock pocket extends a full 17 inches across your wall while maintaining a sleek 7-inch depth. Weighing an incredibly light 3 pounds, it provides an exquisite visual frame for greenery without creating structural stress or sagging on vertical boundaries.

Versatile Surface Mounting:
The WP-003 is engineered with a completely flat rear face, allowing it to mount seamlessly flush against almost any vertical surface. It is ideal for breaking up long, monotone expanses on wooden fences, brick patio walls, outdoor pool enclosures, or bare stucco. It also nests flawlessly over our custom rock wall panels, giving you the ability to layer three-dimensional pocket planters directly into a large-scale rocky backdrop.

Embedded Structural Backplate:
To provide maximum stability and prevent your fastening hardware from pulling or warping, a high-density 1/8" ABS plastic reinforcement plate is cast directly into the polyurea composite backing. This hidden internal plate ensures a solid, uniform surface for your screws to bite into, locking the stone pocket flat and secure against your structural wall.

Indoor vs. Outdoor Styling Guidelines:
This unit is built primarily for outdoor applications or spaces intended to handle open moisture drainage. Because these planters are not fully waterproofed for indoor water containment, we highly recommend setting up interior displays, sunrooms, or reception lobbies using low-maintenance air plants or premium faux botanicals (plants and staging elements are not included).

*All measurements are approximate. Due to our custom hand-sprayed casting process, edge and wall thicknesses will vary slightly, giving every individual rock planter its own unique, natural character.*

MEASUREMENTS IN US/IMPERIAL
Length: 17 in
Width: 7 in
Height: 9 in
Weight: 3 lbs

MEASUREMENTS IN METRIC
Length: 43.25 cm
Width: 17.75 cm
Height: 23 cm
Weight: 1 kg

1. Select Your Hardware:
Because our rock planters mount to a wide variety of wall types, fastening hardware is not included. Please select high-quality screws suited to your specific surface at your local hardware center (e.g., standard exterior deck screws for wooden fences, masonry Tapcon anchors for brick or concrete block, or secure toggle bolts for indoor wall studs).

2. Mount the Planter:
Position the stone pocket against the wall at your chosen height and drive your screws directly through the flat rear face where the internal 1/8" ABS backing plate is embedded to lock the unit securely in place.

3. Add Outdoor Drainage (Recommended):
For optimal plant health when installed outdoors, drilling drainage holes is highly recommended to protect roots from over-saturation. Unlike traditional ceramic, clay, or real stone products—which easily pit, crack, or completely shatter under pressure—our advanced polyurea composite material can be modified effortlessly. Simply use a standard cordless drill paired with a wood or metal drill bit to cleanly pop a few drainage holes through the bottom of the internal pocket cavity.