72" x 28" Cliff

You Save:

Base price:

Options:

72" x 28" Cliff Series background in our signature black finish.

Best Fit: Statement Centerpieces & Larger Reptiles
Our deepest relief size, with generous basking ledges on one face and deep cave pockets on the flip side.

Color Options

Black

PRODUCT DETAILS

Our Deepest Relief, Molded From Real Cliff Faces

The 72" x 28" Cliff Background is our deepest-relief size, ranging 2" to 13" thick compared to 2"–7" on the rest of the line. That extra depth means larger basking ledges and deeper cave pockets, ideal for bigger reptiles or a more dramatic aquascape centerpiece. Mount it one way for basking ledges, or flip it over for a cave-effect layout.

Unlike our other colors, Cliff Series black is made from our straight polymer base rather than a crushed rock and sand mix, so there's zero color transfer to your hands. It's also highly scratch-resistant and easy to keep clean, whether that's a quick rinse or a stiff brush.

Technical Specs:

Product: 72" x 28" Cliff Series background.
Approx. Dimensions: 71.5" Long x 27.5" High x 2"–13" Deep.
Weight: Approximately 15 lbs.
Color: Black (polymer finish, no crushed rock/sand mix).
Recommended Use: Statement centerpieces for larger aquascapes, and enclosures for bigger reptiles.
Material: Non-toxic, safe for direct contact with aquatic and terrestrial livestock.
Reversible Design: Mount one way for large basking ledges and climbing terrain, flip it for deep cave-like shadowing and fish hiding spots.

BUILT FOR AQUARIUMS & REPTILES

Freshwater Safe: Great for cichlids, schooling fish, discus, and planted freshwater tanks.
Reptile Safe: Works as a basking and climbing backdrop for bearded dragons, snakes, and geckos, including larger individuals.
Deepest Ledges in the Line: The extra relief gives bigger reptiles more room to climb and bask, and creates deeper hiding spots for fish.
Black Finish: Makes fish coloration and reptile scale patterns stand out.
Non-Toxic Materials: Safe for direct contact with aquatic and terrestrial livestock.
Easy to Clean: Highly scratch-resistant, a stiff nylon brush (or even a handheld brass or steel wire brush) is all it takes.

INSTALL YOUR WAY

Plug-and-Play Fit: Built as a statement centerpiece for larger aquascapes or enclosures housing bigger reptiles.
Ships Rolled or Folded: Makes it easier to maneuver into tanks with or without center braces. If it arrives tied, untie it slowly rather than all at once, so it doesn't snap open around your animals or the enclosure glass.
Secure with Silicone: We recommend 100% silicone along the back edges for a secure hold, especially given the added depth and weight of this size.
Trim as Needed: Cut to fit around filters, heaters, or enclosure equipment with a kitchen boning knife, oscillating power tool, hand saw, Dremel, or hole saw.
Flip for a Different Look: Use one side for deep basking ledges, flip it for a dramatic cave-effect hide layout.
Order a Sample First: Not sure about the texture or fit? Order a sample before committing to the full size.

CARE & SETUP

If It Arrives Bent: Lay it flat in direct sunlight (or use another heat source) to relax it back into shape before mounting.
Attaching: Secure with 100% silicone along the back edges, no full-panel adhesive needed.
Cleaning: Rinse with water, or use a stiff nylon brush for anything more stubborn. Remove the background before using medicines like Methylene Blue, which can stain it.
New Tank Note: A bit of cloudiness in the days after adding new décor is normal in freshwater tanks and should clear within about 2 weeks. Stick to smaller water changes (around 50% every 7 days, or 25% every 3) rather than trying to rush it, and hold off adding fish until an uncycled tank finishes cycling.
Reptile Enclosures: Rated to withstand direct heat up to 200°F. Keep any heat lamp or element that could exceed that from touching the background directly.
Waterproof Terrariums: The background can be drilled to add a small pump-driven waterfall, add moss for extra effect.
Color Note: Because black uses our straight polymer base rather than a crushed rock/sand mix, it's more difficult to paint or recolor later if you change your setup.